Home » Mounting Kit to mount rims on ABS models SIP | Vespa GTS Models 125-300 ('14-)
Mounting Kit to mount rims on ABS models SIP | Vespa GTS Models 125-300 ('14-) SIP Falan Parts
Mounting Kit to mount rims on ABS models SIP | Vespa GTS Models 125-300 ('14-) SIP Falan Parts
SIP

Mounting Kit to mount rims on ABS models SIP | Vespa GTS Models 125-300 ('14-)

In stock
SKU: MV000617K
(1)
€19.99
Trustpilot

請注意，由於假期季節及系統變更，我們的訂單處理時間將延長至5-6個工作天（原為1-2個工作天），此狀況持續至7月17日。感謝您的理解。在其他地方找到更便宜的價格？我們將嘗試進行價格匹配。

PRODUCT DESCRIPTION 

Mounting Kit to mount rims on ABS models SIP

INFORMATION 

  • Fit rim with 5 new rim bolts (bolts with hexagonal head, internal thread) and 5 M8 washers.
  • Fit the ABS tone wheel to the internal thread of the rim nuts, using the five M5 torx bolts and the five M5 wave washers.
  • Refit the swingarm
  • The distance between the ABS sensor and the tone wheel should be 0.4mm min. If the distance is smaller than that, or if the tone wheel rubs on the sensor, use one or even two of the washers on the bolt that secures the sensor between the swingarm and the sensor to adjust the distance. ATTENTION: The distance between sensor and tone wheel should not be too large, if it is there may be no signal at all.
  • Do not forget to order new LOCTITE for the mounting kit. Can be found with the following product numeber: 14100000

FITMENT