Primary Driven Gear 67 teeth input shaft DRT 367 | Vespa 125 VN/VM/150 VL/VB1

In stock
SKU: 40433670
Regular price €59.66
Shipped in 1-2 days if in stock.

PRODUCT DESCRIPTION 

Primary Driven Gear 67 teeth input shaft DRT 367 

INFORMATION

fits clutch cog 20/​21/​22/​23 teeth

Faro Basso, Fender Light – THE vintage Vespa icons, no doubt! Regrettably, the few remaining classic Vespa Wideframe models tend to be restored to their former glory, conserved, and no longer seen on the road! This is understandable when confronted with a maximum speed of around 65 kph and fragile engine components! It's been fascinating to observe the current technological developments evolving for this scooter type on the German-speaking scooter scene. A reliable motor with adequate torque (10PS) is now possible. DRT has decided to assist in this with the production of suitable gear cogs.

This output shaft gear cogs 'DRT 807' comprises cogs with 13-13-17-21 teeth respectively and is part of a four-speed gearbox upgrade. This kit enables the original three-speed gearbox included with the Vespa 125 VM/VN/150 VL/VB1 to be upgraded to a four-speed type for improved exploitation of any extra power available and a higher maximum speed! This conversion requires mechanical knowledge to be safely and adequately installed. The original output shaft from the VB1M engine can still be used, along with the input shaft. The gear selector and cruciform from the GS 150 should be used to replace the VB1M items.

The corresponding gear cog sizes and their possible combination possibilities are listed below. With the use of the original first gear, the rest of the gear cogs originate from the Vespa PX Lusso models engine. The first and fourth gear cogs will require slight modification, however, with the first gear having its center section machined to fit and the fourth requires narrowing. The suitable DRT gear cogs can be used as well, of course.

DRT also produces high quality primary drive cogs with 65 or 67 teeth, which have the effect of altering the overall gear ratio. This can be achieved without replacing the standard gear cog ratios and is fully compatible with otherwise original gearbox setups.

If you want the option of four gears on your Faro Basso, you will need to invest a lot of time and work!

Do not forget to order the gear selector and cruciform from the GS to complete this project. You can then experiment with possible gear ratios, starting with a primary drive cog that has 65 cog teeth.

The following gear cog combinations are possible, the DRT recommendations for use with a 65 tooth primary drive cog, are marked in red.

Gear

Output Shaft

DRT Gear Cog

Name

Article Number

Note

1° Gear

13 th

56 th

original (Ø 114,93mm, 3 Gear VB1m)

modifications necessary

2° Gear

13 th

42 th

PX/PX Lusso

15280500

 
   

42 th

DRT 801

40438010

 
   

41 th

DRT 270

40432700

 
   

40 th

DRT 270/A

4043270A

 

3° Gear

17 th

38 th

PX Lusso

88130000

 
   

38 th

DRT 802

40438020

 
   

37 th

DRT 281

40432810

 
   

36 th

DRT 282

40432820

 

4° Gear

21 th

37 th

DRT 290

40432900

modifications necessary

   

36 th

PX Lusso

22322900

modifications necessary

   

36 th

DRT 291

40432910

modifications necessary

   

36 th

DRT 291-O

4043291F

 
   

35 th

PX Lusso

88120000

modifications necessary

   

35 th

DRT 803

40438030

modifications necessary

   

35 th

DRT 803-O

4043803F

 
   

34 th

DRT 292

40432920

modifications necessary

   

33 th

DRT 305

4043305K

modifications necessary

FITMENT

MOTOVESPA 125 N 125 VT 2T AC 1959  
MOTOVESPA 150 S 150 VTT 2T AC 1962  
MOTOVESPA 150 S 150 V13502C 2T AC 1964  
MOTOVESPA 150 Sprint 150 04C 2T AC 1966 150001->177000
VESPA 125 125 VM1-2T 2T AC '52-'54  
VESPA 125 125 VN1-2T 2T AC '54-'57  
VESPA 150 (T1/150) (D) 150 VL1T 2T AC '55  
VESPA 150 150 VL1-3T 2T AC '54-'57  
VESPA 150 150 VB1T 2T AC '57-'58